Shijiazhuang Development Zone Daxin Electronic Science And Technology Co., Ltd.
Main products:HF-Vacuum Dryer
Products
Contact Us
  • Contact Person : Ms. Ma Mary
  • Company Name : Shijiazhuang Development Zone Daxin Electronic Science And Technology Co., Ltd.
  • Tel : 86-311-86682328
  • Fax : 86-311-86682328
  • Address : Hebei,Shijiazhuang,Shijiazhuang XinHuaOu yongchang Road 5
  • Country/Region : China
  • Zip : 050000

Mirror Stainless Steel Sheet with 0.15 to 3mm Thickness, Used in Kitchenware

Mirror Stainless Steel Sheet with 0.15 to 3mm Thickness, Used in Kitchenware
Product Detailed
Mirror Stainless Steel Sheet with 0.15 to 3mm Thickness, Used in Kitchenware Standards: ASTM A240/480, AISI 304, JIS 4305...

Mirror Stainless Steel Sheet with 0.15 to 3mm Thickness, Used in Kitchenware

Key Specifications/Special Features:Material: stainless steelType: 304, 316, 430, 310, 420J2, 321, etc.Thickness: 0.15 to 3.0mmWidth: 914 to 1,524mmStandards: ASTM A240/480, AISI 304, JIS 4305 EN10204 3.1/EN10028-7Production: Hot-rolled: Production process: hot-rolled, annealed and pickledDescription: condition and finish preferred for corrosion- and heat-resisting applicationsCold-rolled: Production process: hot-rolled, annealed, descaled, cold-rolled, annealed, pickled, final skin pass rolledDescription: smooth finish achieved by cold rolling, then annealing and pickling, followed by skin pass rolling
2B: the general-purpose, cold-rolled, smooth finish obtained as a result of a final light pass through polished rolls at the mill
BA: bright annealed finish is a bright, cold-rolled, highly reflective finish retained by final annealing in a controlled atmosphere furnace. The finish has large application in the appliance and automotive industry and as a decorative finish in architecture. The brightness and reflectivity is a function of thickness and grade. Consultation is recommended prior to specification in architectural applications. BA finish is usually supplied with a PE or PVC coating as a surface protection
No.4: produced from 2B finish often by a service center rather than the production mill. It is a general-purpose ground polished finish used widely for kitchen equipment and applications requiring a decorative finish. No.4 finish is usually supplied with a PE or PVC coating as a surface protection
No.8: highly reflective 'mirror' finish. Produced from 2B finish by polishing with successive finer abrasives followed by extensive buffing. Mainly used in architectural applications
HL:  finished by continuous linear polishing. Architectural purposes, escalators, kitchen ware vehicles
Customer specific: a service center with polishing equipment can produce special finishes for specific applications
  

Mirror Stainless Steel Sheet with 0.15 to 3mm Thickness, Used in Kitchenware



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.